Modes of Operation
The heater comes pre-programmed with a set of heating profi les. There are four
options available - three preset and one user adjustable timer;
1.
Out All Day
(pre-programmed) - has the following preset
times Monday to Sunday, which can be altered if desired;
07.00 until 08.30
17.30 until 22.00
2.
Home All Day
(pre-programmed) - has the following preset
times Monday to Sunday, which can be altered if desired;
08.00 until 21.00
3.
Holiday
(pre-programmed for 7 days at 10°C) - set the number of days
required (from 1 to 300) and the temperature required. 7°C is advised if you
just want to protect the property from frost while you are away.
4.
User Timer
- provides greatest fl exibility to the user. Four time slots are
available throughout the day and these can be customised for each day of
the week.
The heater can also maintain a constant room temperature using the
following modes;
1.
Manual
mode heats the room to a comfortable temperature of 21°C.
2.
Eco
mode maintains a room temperature of 18°C. By reducing the room
temperature slightly, signifi cant energy savings can be achieved. The green
display colour indicates that selected temperature provides a comfortable
room temperature while reducing energy consumption.
3.
Frost Protect
mode maintains a room temperature of 7°C. This mode should
be used to provide protection against frost as indicated by the blue display.
Select
Off
to switch off the appliance. This mode should be used when heating is
not required for extended periods. Press any of the buttons to activate the display
and then select the required mode of operation.
NOTE
:
In all modes, and can be used to adjust the required room
temperature. In timer modes, this change is temporary and the heater will
revert the saved heating profi les at the end of the
Comfort On
period.
NOTE
:
Once modifi ed a programme must be selected if you
want to begin using it.
NOTE
:
It is recommended that the timer is used as doing so can
reduce the running cost. Operating the appliance in the permanent
heating modes may result in increased running costs.
13
