Control Functions
The heater controls can be easily adjusted by using the six buttons
on the User Interface.
1. The
Display Screen
shows the options available at each stage
of adjustment.
2.
Menu
– displays the main options list;
Date/Time
– Set the date and time.
Mode
– Set the mode of operation.
Options
– Temperature units, daylight savings time, lock settings and
service
information.
3.
BACK
returns to the previous programming stage.
4. The and buttons are used to navigate through the menus and alter
setting values. The and button are also used to adjust the required room
temperature on the main screen. The screen colour changes based on the
temperature selected, showing deep blue through to bright red.
5.
ENTER
is used within the menu options to confi rm settings. On the main
screen pressing
ENTER
will display the enabled features.
6. The timed periods during which the heater is providing heat are defi ned as
‘Comfort On’
(this is displayed at the bottom of the screen).
Outside of heating periods the heater will not deliver heat and these periods
are called ‘
Comfort Off
‘.
While constant heat modes are active, the mode of operation is displayed at
the bottom of the screen e.g.
‘Manual’
.
7. The
ADVANCE
button overrides the heating settings and changes the
operational state of the heater. If a timer mode is active, pressing
ADVANCE
will cause the heater to remain ON until the next OFF period is due, or OFF
until the next ON period is due.
If the heater is in a constant mode of operation,
Advance
can be used to
switch the appliance ON and OFF.
ADVANCE
is also used to enter
Boost
mode.
Boost
mode delivers heat for
between one and four hours.
11
