CreativeStar Artemis TI-CS-T1, Руководство пользователя

Страница: 6 / 44

2
2. Battery and Charger
It is recommended to charge battery immediately when the device
indicates low power. For detailed information on how to change a
battery, please refer to
Section 4.1 Battery Setting on page 7
.
The device is equipped with two sets of lithium-ion batteries and a
battery charger. It is strongly recommended that you only use the
original batteries and charger. Using any other brand of chargers
or lithium-ion batteries may cause fire or critical damage.
2.1 Charging Battery
• Align the battery notch on the charger stand, gently press the
battery down along the triangle arrow, and press it tightly.
•
Connect the charger to an AC power outlet. During charging,
the red LED lights up, and after charging, the green LED lights
up.
2.2 Direct Charging
You can use the adapter to charge the built-in battery. It takes
about 5 hours to fully charge a dead battery. The indicator light is
red when charging, and remains green after being fully charged.
2.3 Attention for Using Battery Charger
•
Battery charging can only be done indoors. Do not short circuit
the battery.
•
Do not place the battery in a high-temperature environment
(≥60
°C
). Do not disassemble the battery or put it in a fire,
otherwise it may cause an explosion.
•
Do not try to modify the battery or charger.
•
Lithium ion batteries have no memory effect and can be
recharged at any time.
• After charging, please remove the charger from the socket
immediately.