Creative Sound Blaster X7, Руководство по эксплуатации продукта, Страница: 13 / 23

Turn on Direct Mode
Appendix
Set Impedance
to “8Ω”
3. Output and Input Setup
• At the Mixer tab, select “Playback” and set the Master Speaker Volume to 100%. Set the rest of the Monitoring
source and SPDIF Out to 0% and mute them.
2. Cable Loopback Connection and Set Impedance
Use a high quality RCA to RCA audio (stereo) cable; connect the Line output to Line Input for the loopback test.
Then set the impedance to 8Ω at the back of Sound Blaster X7.
24
S O U N D B L A S T E R X 7 P R O D U C T E X P E R I E N C E G U I D E S O U N D B L A S T E R X 7 P R O D U C T E X P E R I E N C E G U I D E
25
• Your Sound Blaster X7 is now properly set up for Analog measurement.
• Select “Recording”, set Line In volume at 50%, set all other Recording inputs to 0% and mute them.