Creative Network Blaster CW2230 Скачать руководство пользователя

Страница: 45 / 57

Safety Precautions D-1

Safety Precautions

General Safety

To avoid the risk of fire, electric shock or personal injury, note the following

precautions when using the product:

❑

Do not expose the product to direct sunlight or excessive heat.

❑

Do not place the product in surroundings that exceed 40°C (104°F).

❑

Avoid humid conditions. Do not place the product near a water source or outlet.

❑

Do not clean the product with a damp cloth or liquid cleaner.

❑

Do not put any weight on the product.

❑

Allow only qualified personnel to service or repair the product, if such is necessary.

Exposure to
Radio
Frequency
Caution

❑

The radiated output power of this device is far below the FCC radio frequency exposure

limits. Nevertheless, the device shall be used in such a manner that the potential for

human contact during normal operation is minimized.

❑

The product and any attached external antenna, if supported, shall be placed in such a

manner to minimize the potential for human contact during normal operation.

❑

In order to avoid the possibility of exceeding the FCC radio frequency exposure limits,

human proximity to the antenna shall not be less than 2.5 cm (1 inch) during normal

operation.

❑

The indoor antenna must be totally isolated and does not have a line of sight to an

external GPS antenna, to avoid feedback reflected RF signal.

Federal
Communicatio
n Commission
Interference
Statement

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one of the following measures:

Содержание Network Blaster CW2230


























































Результаты поиска

Содержание Network Blaster CW2230

Отзывы:

Похожие инструкции для Network Blaster CW2230

Бренды по названию

Популярные бренды

Creative Network Blaster CW2230, Руководство пользователя

Результаты поиска

Содержание Network Blaster CW2230

Отзывы:

Похожие инструкции для Network Blaster CW2230

Бренды по названию

Популярные бренды