•
Note that using NFC will simplify the above pairing process. Just tap your devices consecutively to the
headset to connect both in Multipoint.
Creative ShareMe™ connection
•
The Creative Hitz WP380 allows you to share your entertainment with another person wearing another
set of Creative Hitz WP380 or Creative wireless headset featuring Creative ShareMe™ connectivity.
•
Before enabling Creative ShareMe connection, pause your music playback and disengage any voice
call on your mobile device.
•
Place the two headsets to be paired close together and power them on.
•
Simultaneously press the Volume Up “+” and Volume Down “-“ buttons (Set A) on the
fi
rst headset until
the indicator turns Green and blinks rapidly; and simultaneously press the “Next“ and “Previous“
buttons (Set B) on the second headset until the indicator turns Green and blinks rapidly.
•
Note that if the
fi
rst headset to be paired is using Set A buttons, then the second headset will need to
use Set B buttons; or vice versa.
•
Once the two headsets are paired, their indicators will blink in a combination of blue and green colors.
•
To conserve battery life, ShareMe connection will end in 15 minutes if no audio is streamed from the
device.
•
Note that in Creative ShareMe connection, the paired headset is considered as one of the Multipoint
device.
Voice command and indicators
•
The Creative Hitz WP380 provides audible indicators on headset connectivity or battery level status.
Press the Multifunction button twice to
fi
nd out the battery level status (except during voice calls).
•
Note that this is currently available in English only.
•
The headset battery level indicator will be displayed on an iPhone
®
or iPad
®
once paired and
connected (device dependent).
Clear or reset headset
•
Press and hold the Volume Down “-” and Multifunction buttons for more than 6 seconds to clear the
paired
Bluetooth
devices
•
If the headset malfunctions, reset it by supplying USB power, then press the Volume Up “+” and
Multifunction buttons for about 1 second
Automatic shutdown
•
Once the headset is powered on, if it is unable to connect to the last paired device or failed to pair with
a new device within 5 minutes, the headset will automatically shut down.
List of button, indicator and connector / port functions
1.
Multifunction (Power / Pair /
Call and Play / Pause)
2.
Volume Up / Volume Down
3.
Next, Forward / Previous,
Backward
Power
: Press and hold for 2 seconds to power on the headset.
Press and hold for 3 seconds to power off the headset.
Pair
: In off mode, press and hold for more than 5 seconds to
activate Pairing mode.
Call
: Press and hold for 1 second to activate voice dial. Press
and release to answer or end an incoming call. Press and hold
for 2 seconds to reject a call during an incoming call. Press twice
to accept a call waiting and put on hold the ongoing call. Press
together with ‘+’ button and release to initiate a three-way call.
Music playback
: Press to play. Press again to pause playback.
Press ‘+’ to increase or press ‘-‘ to decrease volume. A beep tone is
emitted at maximum volume level. Press and release both ‘+’ and
‘-‘ to mute or unmute the microphone during a call.
(not available in ShareMe).
Press to change to the next or previous track. Press and hold to
scroll forward or backward a track (device dependent).
Button
Function
/
/
