38
−
Empty field
– the service is not connected.
−
A device name and Bluetooth Device Address
– identifies
the device that is using the service.
At times you need to interrupt a connection from the server side. To do this, right-click the
local service and then select
Stop
from the pop-up menu. To restart the service later, right-
click the local service and then select
Start
.
Hardware Tab
The
Hardware
tab provides basic information about the Bluetooth hardware installed in this
computer. In some cases, it allows you to have access to the
Advanced Settings dialog box
.
In this tab, you will see the following sections:
Devices:
Name:
the name of the device, e.g.,
Bluetooth Device
.
Type:
the type of device you have, e.g.,
USB
.
Device Properties:
Device Status:
indicates if the device is operating properly or if there is a
problem or conflict.
Manufacturer:
the name of the company that made the device you selected in
the Devices section of this dialog box.
Firmware Revision:
the manufacturer’s firmware version
number.
Device Address:
displays the Bluetooth Device Address (BDA or BD_Addr)
programmed into this device when it was manufactured.
HCI Version:
the version number of the Bluetooth Specification that the Host
Controller Interface (HCI) complies with.
HCI Revision:
the revision number of the Bluetooth Specification that the Host
Controller Interface (HCI) complies with.
LMP Version:
the version number of the Bluetooth Specification that the Link
Manager Protocol (LMP) complies with.
LMP Sub Version:
the sub-version number of the Bluetooth Specification that
the Link Manager Protocol (LMP) complies with.
Click
Apply
to save the changes – the changes will be applied the next time you restart your
Bluetooth device.