Installing Blaster CD-RW 6
8.
When the destination path is correct,
choose
Next
. The installation program
copies the files to your computer. The
Device Selection dialog appears.
9.
Select the device that you have connected
to the CD-RW drive.
❒
Choose “IDE Hard Disk Controller
Card” if you have daisy-chained the
CD-RW drive to the primary port on
your motherboard.
❒
Choose “Onboard IDE Secondary
Port” if the CD-RW drive is
connected to an available secondary
IDE port on your motherboard.
❒
Choose “Plug and Play Card” if you attached the drive to a Plug and Play interface card.
❒
Choose “Non-Plug and Play Card” if the drive is connected to a non-Plug and Play
interface card.
10. The Setup Complete dialog
appears.
11. Choose
Finish
to restart your
computer.