Installing Blaster CD-RW 2
Installing the
Creative
CD-RW Drive
To install the Creative CD-RW drive:
1.
Turn off your computer, and
disconnect the power cable.
2.
Disconnect the monitor and
other devices that are
connected to the back of the
computer.
3.
Remove the computer cover.
4.
Remove the cover from an
available 5¼” bay for the
Creative CD-RW drive.
5.
Connect the data cable to the
rear of the Creative CD-RW
drive.
6.
Optional: Connect the audio
cable to the rear of the
CD-RW drive.
1
2
3
4
5
6
Power Supply
Connector
Data Cable
Connector
CD Audio
Connector
Colored
Stripe
Pin 1
Before you remove the computer
cover, touch a grounded metal
surface to discharge static
electricity.
• When connecting the data cable,
align the cable’s colored stripe
to pin 1 on the CD-RW drive.
• See “Adding a CD-ROM Drive”
on page 8 if you connect the
CD-RW drive with an existing
hard drive or CD-ROM drive.