Creative Audigy Platinum eX, Руководство по началу работы

Страница: 83 / 97

Troubleshooting C-3
Individual analog recording sources cannot be selected in Surround Mixer.
Five analog recording sources are combined under the selection Analog Mix (Line/
CD/TAD/Aux/PC) . For more information, see “Individual analog recording sources
are not displayed in Surround Mixer.” on page C-2.
To record an individual analog source:
❑
In the one-column record panel of Surround Mixer, make sure the recording
source selected is Analog Mix (Line/CD/TAD/Aux/PC) .
❑
In the six-column panel, mute the analog sources that you do not want to record
by clicking the Mute check box to select it.
No sound from the speakers.
Check the following:
❑
You have connected your speakers to your card's output.
❑
You have selected the correct source in the Mixer panel.
❑
If both the above conditions have been met and you still do not get any sound,
click the red plus sign above the VOL control and check whether the Digital
Output Only check box is selected. If it is, you are in the Digital Output Only
mode and so must connect to digital speakers to hear the sound from your audio
card. See the section on Digital Output Only in Surround Mixer’s online Help for
more information.
No audio output when playing digital files such as .WAV, MIDI files or AVI clips.
Check the following:
❑
The speakers’ volume control knob, if any, is set at mid-range. Use Creative Mixer
to adjust the volume, if necessary.
❑
The powered speakers or external amplifier are connected to the card’s Line Out
or Rear Out jack.
❑
There is no hardware conflict between the card and a peripheral device. See
“Resolving I/O Conflicts” on page C-8.