Installing Hardware 2-1
Installing Hardware
Installation Steps
Step 1: Prepare the
external Audigy
Drive
1. Stick the four rubber feet to the underside in each
corner of the external Audigy Drive as shown in
2. Place the external Audigy Drive near your
computer.
Step 2: Prepare your
computer
1. Turn off your computer and all peripheral devices.
2. Touch a metal plate on your computer to ground
yourself and to discharge any static electricity, and
then unplug the power cord from the wall outlet.
3. Remove the computer cover.
4. Remove the metal brackets from two adjacent
unused PCI slots as shown in Figure 2-2. Put the
screws aside for use later.
Turn off the main power
supply and disconnect your
computer’s power cord.
Systems using an ATX power
supply unit with soft power
off may still be powering the
PCI slot. This can damage
your audio card when it is
inserted into the slot.
Figure 2-1: Sticking rubber feet
Remove any existing audio
card or disable the onboard
audio. For more information,
PCI slots
Figure 2-2: Removing metal plates
ISA slots
metal brackets
Содержание Audigy Platinum eX
