Creative Audigy Platinum eX, Руководство по началу работы, Страница: 22 / 97

About the Sound Blaster Audigy Card and external Audigy Drive 1-6
Using Creative
Surround Mixer To adjust headphones volume:
1. Click
Start -> Programs -> Creative -> Sound Blaster Audigy -> Surround
Mixer .
2. On the lower half of Surround Mixer, make sure that the Mute check box under
the Volume slider is clear. Otherwise, click the check box.
3. Drag the Volume slider left or right to adjust the headphones volume.
To adjust microphone gain:
1. Click
Start -> Programs -> Creative -> Sound Blaster Audigy -> Surround
Mixer .
2. On the lower half of Surround Mixer, click an audio input source button with a
down arrow, and then select Line-In 2/Mic 2 .
3. Make sure the check box below the Line-In 2/Mic 2 slider is cleared. If not, click
it to clear the check box. This will unmute the audio input source.
4. Drag the slider to adjust the microphone gain.
Using a Remote
Control with
Your Computer
The external Audigy Drive has an infrared receiver for the remote control. This
remote control lets you operate your computer from the comfort of your sofa or bed
up to a distance of 4 meters. For details, refer to the RemoteCenter online Help .
To install Surround Mixer and
other applications, see
“Installing Drivers and
Applications” on page 3-1.
• For best effects, set the
headphones volume and
microphone gain levels to
75% in Surround Mixer,
and then use the external
Audigy Drive’s control
knobs to make further
adjustments.
• If you set the headphones
volume or microphone
gain levels to 0%, or mute
them in Surround Mixer,
you hear no sound if the
external Audigy Drive’s
control knobs are set to
the maximum.