PARTS
B
A
C
D
E
F
G
J
* Not Pictured
INSTRUCTIONS
7 FT. SWING BEAM
H
This manual documents the
assembly of a 4 Position Swing
Beam. The 3 Position is similar.
See the instructions for the
Gym Tower for information on
proper ground cover.
All hardware on this set
is specially coated for
corrosion resistance.
If non-Creative Playthings
hardware is used, it MUST
be galvanized or stainless
steel.
Premium Pine 7 Ft. 4 Position Swing Beam
63058-202 4 Position Swing Beam
63059-212 7 ft Swing Beam Legs
50546-777 3 Swings, 1 Trapeze
Premium Pine 7 Ft. 3 Position Swing Beam
63061-202 3 Position Swing Beam
63059-212 7 ft Swing Beam Legs
AA934-204 2 Swings, 1 Trapeze
Parts for the optional Glider:
50545-555 Glider Bracket Pack
AA911-342 Chained Glider
A 1 40587-102 4 Position Swing Beam Assembly
OR
* 1 40586-102 3 Position Swing Beam Assembly
B 1 32620-102 Angle Brace 4 x 4 x 16-7/8"
C 1 32625-102 Leg Brace 4 x 4 x 58"
D 2 40447-102 Leg Assembly, 7ft. Swing Beam
E 1 14175-400 T-Bracket, Green
F 1 14176-400 Beam Retainer, Green
G 1 14162-400 8" L-Brace, Green
* 2 14174-400 Beam Bracket (in Hardware Bag)
* 2 36515-102 Stake 2 x 2 x 18"
H 1 40311-400 Trapeze Assembly
J 3 40321-400 Sling Swing Assembly (2 Swing for 3 Position Beam)
1 50395-720 Hardware Bag, Swing Beam
1 50400-721 Hardware Bag, 7 Ft. Swing Beam
IMPORTANT: When installing a Swing Beam to a Norfolk or Man-
chester Gym, do not install the two swing hangers closest to the
gym. The area must be kept clear for tire swing clearance.
