Assembly
© Copyright 2005, Creative Playthings
Pine Skybox
19690-100 Rev J (06-16)
Page 20
ASSeMbly InStRuCtIonS
Save all instruction sheets and receipts in case it becomes necessary to con-
tact Creative Playthings for warranty service and/or part replacement. the
warranty can be found in your owner’s Manual.
Please fill out the warranty card on the back of your owners manual. your
completed warranty card will allow us to quickly process warranty claims.
thank you.
Install a Skybox Play floor to a Gym w/ Clubhouse or Play floor
42-7/8"
42-7/8"
4-3/8"
4-3/8"
drill holes
The Skybox sandbox must be installed as shown on the pre-
vious page.
fasten Cleat to Gym Sandbox end
A 1" diameter counter-bore, 1/2" deep, is required at each
hole in the cleat attached to the Gym Sandbox end for the
included 2" bolts to fit.
5/16 x 2-1/2" bolts can be used
without drilling a counter-bore. 5/16 x 2-1/2" bolts are
not included.
install remaining Cleat and Stringer as described in the Play
Floor instructions.
Cut Platform boards to Size
installing a Skybox Play Floor in this configuration requires
the Platform boards be trimmed to 42-7/8". Check for a prop-
er fit before cutting the Platform boards. drill 3/16" diameter
holes 5/8" from the cut ends.
once the boards are cut to size. Proceed as described in
Play Floor instructions.
