Page 3
©
Copyright 2005, Creative Playthings. Printed in U.S.A.
19716-400 Rev C (11-20)
9 Ft. Swing Beam
ASSEMBLY INSTRUCTIONS
4-1/8"
12-1/8"
STEP 1 – Mark & Drill Hole for Bracket
Determine the desired placement of the Swing Beam. The
Swing Beam can be attached to any of the four Corner Posts.
Remove the Hex Bolt Assembly that connects the Corner Post
and the Roof Rafter. The Hex Bolt Assembly will be replaced
in a later Step. (A Hex Bolt Assembly consists of one Hex Bolt,
one Lock Washer; one Flat Washer and one Weld Nut.)
Make a mark 4-1/8" below the top hole of the Corner Post and
make a second mark 12-1/8" below the top hole of the Corner
Post. Drill a 7/16" diameter hole at each mark.
STEP 2 – Swing Hangers
It is extremely important that you read and follow in installation
procedure provided in the Swing Hanger package. The Swing
Hangers should be mounted to the underside of the Swing
Beam Assembly in the positions shown.
In the case that a Spiral Slide Direct Adapter is attached to
the Gym, a Ring Trapeze should be mounted closest to the
Gym. The Glider should be mounted at the end of the Swing
Beam next to the legs.
H/D Ny-Glide
Swing Hangers
Swing Beam Rail
Front View
H/D Ny-Glide
Swing Hanger
Omit these hangers
on the Norfolk or
Manchester
Omit these hangers if
installing optional Glider
Lag Screws 3/8 x 3 1/2"
with 3/8 Flat Washers
Remove Hex Bolt Assembly
L Brace can be
used as a guide
Gym
End
IMPORTANT: When installing a Swing Beam to a
Manchester or Norfolk Gym. Do not install the two
swing hangers closest to the gym. The area must
be kept clear for tire swing clearance.
50395-703
Hardware Bag, 3/8" Fasteners
18 12002-207
Flat Washer 3/8
7 12017-207
Lock Washer 3/8
4 17001-103
Weld Nut 3/8"
2 17003-1213 Hex Bolt 3/8 x 3"
2 17003-1413 Hex Bolt 3/8 x 3-1/2"
1 17003-1613 Hex Bolt 3/8 x 4"
2 17003-2013 Hex Bolt 3/8 x 5"
1 17003-3013 Hex Bolt 3/8 x 7-1/2"
6 17036-1603 Lag Screw 3/8 x 4"
3 12052-107
Nylock Nut 3/8"
2 15081-704
1" Hole Cap Brown
50395-712
Hardware Bag, 5/16" Fasteners
7 12002-206
Flat Washer 5/16
6 12017-206
Lock Washer 5/16
6 17001-105
Weld Nut 5/16
2 17003-811
Hex Bolt 5/16 x 2"
2 17003-1611 Hex Bolt 5/16 x 4"
1 17003-1811 Hex Bolt 5/16 x 4-1/2"
2 17003-2211 Hex Bolt 5/16 x 5-1/2"
4 15081-704
1" Hole Cap Brown
1 15084-704
1-1/2" Hole Cap Brown
10 12038-103* Quick Link 1/4"
10 14057-024* Chain 3/16 x 24" No Coating
50395-701
Hardware Bag, 5/8" Fasteners
2 12002-211
Flat Washer 5/8"
1 17123-5810 Hex Bolt 5/8 x 10"
1 12052-111
Nylock Nut 5/8"
6 17020-113
Wood Screw #10 x 2-1/2"
50395-723
Hardware Bag, 9 Ft. Swing Beam
2 14174-400* Beam Bracket
3 15144-950* Plug, 50 Mm Square, Black
1 50299-700
Bag HD Ny-Glide Swing Hangers (6)
2 12133-313
5/16" Spring Hook
50299-700
Bag HD Ny-Glide Swing Hangers (6)
6 14090-100* Heavy Duty Ny-Glide Swing Hanger
12 17036-1403 Lag Screw 3/8 x 3-1/2"
12 12002-207
3/8" Flat Washer
50470-100
Creative Nameplate Bag
1 14209-100* Creative Nameplate
4 17128-202
Stainless Pan Head Screw #6 x 1/2"
In addition, the 4 position beam includes:
1 50399-700
Bag HD Ny-Glide Swing Hangers (2)
2 14090-100* Heavy Duty Ny-Glide Swing Hanger
4 17036-1403 Lag Screw 3/8 x 3-1/2"
4 12002-207
Flat Washer 3/8
* Not Shown on Page 2.
