CLS Manuals
CLS Atmosphere LED-panel
www.cls-led.com
- 7 -
- 8 -
CLS REVO Compact Basic / Compact Retail
When your CLS REVO Compact Retail is delivered with an assembled adapter, start with step 7.
1. Take the CLS Revo Compact Retail and cut the cable to its correct length.
2. Strip the powercable and the brown, blue and yellow/green wires.
3. Screw the front off the multi adapter and take the nipple out.
4a. Tread the powercable through the nut and ring.
b. Pass the cable through the mounting hole of the bracket.
c. Shove the nipple over the cable till the mounting hole.
5. Connect the coloured wires to the Live, Neutral and Earth connectors.
Wire (EU) Function
Marking
Brown
Live
L
Blue
Neutral
N
Yellow/green Earth
6. Tighten the nut on the nipple and screw the front back on the multi adapter.
7a. Place the CLS REVO Compact Retail with adapter in the mounted rail.
b. Secure the CLS REVO Compact Retail by sliding the lever sideways. To remove the CLS REVO Compact Retail
always put the switch on "off" and pull the lever back.
c. Select the desired phase (1, 2, 3).
8. Place the connection box on one side of the rail.
9. Connect the end piece on the other side of the rail so the circuit is closed.
10. Put the power wire in the earth socket.
11. The CLS REVO Compact Retail is now ready to use.
INSTALLATION REVO COMPACT RETAIL
REPLACE LENSES
This section shows how to replace the lenses inside the CLS REVO Compact.
Glass
Cover plate
frame
Lensholder
Glass
Cover plate
frame
Lensholder
4
2
1
2
3
4
5
1
3
6
1. The CLS REVO Compact.
2. Disassemble the cover plate by loosening the 4 screws.
3. Carefully lift the items out of the CLS REVO Compact unit and take the lens holder.
4. Press the 4 lenses out of the lens holder and replace them with the desired lenses. Make sure all the lenses are
in the same direction as shown in picture 6.
5. Now carefully place the items in the CLS REVO Compact unit in the right order as shown in picture 3.
6. Tighten the screws by order (crosswise) as shown in picture 6 on the cover plate to keep the REVO waterproof.
The CLS REVO Compact is ready to be used with the desired lenses.
ATTENTION!
make sure that the rubber sealing is correctly in place!
W
ARNING
