CLS Manuals
CLS Atmosphere LED-panel
www.cls-led.com
- 5 -
- 6 -
CLS REVO Compact Basic / Compact Retail
10 mm
1
2
3
4
5
6
7
8
10
11
9
4a
4b
4c
7c
7a
7b
INSTALLATION REVO COMPACT RETAIL
INSTALLATION REVO COMPACT BASIC
1
4
5
6
2
a
b
3
# 871992 CLS mold set
1. The CLS REVO Compact Basic can be installed by using the mounting hole. Drill a hole to secure it in the wall,
floor, ceiling, etc. Drill a second hole for the power wire if the cable connection is indoors.
F
or all situations where a OUTDOOR connection needs to be made to extend the cable of the REVO.
Skip step 2 and 3 if the cable connection is indoors.
2. Use the mold set to make the connection waterproof. Place the cable connection in the bottom of the mold set.
a. Press the cover on the bottom of the mold set.
b. Poor the substance through the hole of the cover. Make sure you completely fill the mold set.
3. Seal the mold set by placing the lid on top of the mold set.
4. Adjust the REVO Compact Basic to the preferred position by turning the unit towards or away from the wall.
5. Put the power wire in the earth socket.
6. The CLS REVO Compact Basic is ready to use.
ALWAYS USE THE CLS MOLD SET. OTHERWISE THERE WILL BE
NO WARRANTY ON WATER OR MOISTURE RELATED PROBLEMS!
W
ARNING
