www.cls-led.com
CLS manuals
CLS Power Strip
- 3 -
- 4 -
Included items
The CLS Power Strip is shipped in one package containing the following items:
• 10 x CLS Power Strip
• 1 x user manual
Optional accessories
• 114200
CLS Power Strip connectioncable 100 cm
• 114210
CLS Power Strip extensioncable set 5-100 cm
• 707037
CLS LDV-45 DMX LED dimmer 4 channels 5Amp 12V-24V output
• 872012
CLS Dimmer Covelight 10-100% input 10-30V output 12V/140W 24V/280W
• 706995
CLS BT20.24 LED power supply 24VDC 20VA 85-264VAC
• 707011
CLS BT45.24 LED power supply 24VDC 45VA 85-264VAC
• 707012
CLS BT75.24 LED power supply 24VDC 75VA 85-264VAC
• 707013
CLS BT120.24 LED power supply 24VDC 120VA 85-264VAC
• 707014
CLS BT240.24 LED power supply 24VDC 240VA 85-264VAC
Note: It is important to read this manual before you install this product.
SAFETY INFORMATION
Warning! This product is for professional use only, not for domestic use.
Read this manual before powering up or installing the CLS Power Strip. Follow the instructions
listed below and observe all warnings in this manual.
INTRODUCTION
The CLS Power Strip is the perfect solution for shelf lighting, furniture, displays, high power cove lighting and
numerous other applications. The CLS Power Strip is dimmable and has an very high light output.
Available CLS Power Strips:
• 114000
CLS Power Strip 3000K, warm white standard version, 120º
• 114010
CLS Power Strip 2700K, extra warm white standard version, 120°
• 114020
CLS Power Strip 4000K, neutral white standard version, 120º
Protection from electric shock
• Disconnect the power supply from AC power before installing, dismounting or maintaining the product.
• Make sure all connectors are connected properly.
• Use only a source of AC power that complies with local building and electrical codes and has both
overload and ground-fault protection.
• Do not expose the unit to rain or moisture.
• Refer all service to a qualified technician.
INSTALLATION
Installing the CLS Power Strip has never been easier. The Power strip contains 3 mounting holes so no profile or
mounting clips are nessecary. Due the 'plug and play' connector only a single click is needed to connect 1 Power
Strip to another Power Strip.
Protection from burns and fire
• Provide a clearance of at least 50 mm around the unit.
• Do not install the product near a heat source.
• Do not install the product in a corrosive, flammable or explosive area.
• Do not modify the product, or install other than genuine parts.
• Do not operate the product if the ambient temperature exceeds 40 oC.
• Do not stare into the LED, this can cause damage to the eyes.
• Operate in a well-ventilated area.
Protection from injury due to falls
• Verify that all covers and mounting hardware are securely fastened.
• Block the access below the work area whenever installing or removing the product.
Mounting holes
100 cm cable
Note: Screw headsize max. ø 6 mm.
With extensioncable set (# 114210).
Mounting hole
