Creative Conners CM Varistar Smart Chain Hoist, Справочное руководство

Страница: 21 / 31

Smart Chain Hoist Reference Manual
Published 4-14-20
frequency brakes will release.
13 Starting frequency
Motor won’t start until the speed
signal is at least this value.
0.5 0.5 0.5
18
High speed maximum
frequency Allows for VFD output at 120Hz
or higher.
110 110 110
30 Regenerative function selection
External brake resistor, L1/L2/L3
power source.
1 1 1
70 Special regenerative brake duty
Duty cycle of the braking
resistor.
10 10 10
71 Applied motor
Other manufacturers' standard
motor.
3 3 3
72 PWM frequency selection
Carrier Frequency. Reduces
output noise.
15 15 15
73 Analog input selection +/-10vdc with reversing enabled. 1 14 14
77 Parameter write selection
Allow parameter writes
regardless of operation status.
2 2 2
79 Operation mode selection
External control at power ON,
changeable to PU mode with
PU/EXT button
0 0 0
80 Motor capacity
Kilowatt rating of
motor.(1hp=0.75kw, 5hp=3.7kw,
10hp=7kw)
2.63 2.63 2.63
81 Number of motor poles
governs the base rpm of the
motor
4 4 4
83 Rated motor voltage
Set the voltage rating from the
motor nameplate.
230 230 230
84 Rated motor frequency
Set the frequency rating from the
motor nameplate.
106 106 106
96 Auto tuning setting/status
Offline auto-tuning status. 0 =
not set; 1 = auto-tuning initiated,
2 = auto-tuning in progress, 3 =
auto-tuning completed. See
Stagehand Pro manual for
instructions
0 0 0
117
PU communication station
number Specifies the inverter station
number.
1 1 1
118 PU communication speed 4800bps 48 48 48
Page 17