Creative Conners CM Varistar Smart Chain Hoist, Справочное руководство

Страница: 20 / 31

Smart Chain Hoist Reference Manual
Published 4-14-20
VFD SETTINGS
The parameter settings on the Mitsubishi Variable Frequency Drive (VFD) are tailored to make the unit
work effectively with each machine. The ​ Smart Chain Hoist ​ uses a different set of VFD parameters
than all of the other Creative Conners, Inc. stock products. Below is a list of the parameters that are
changed from the factory defaults, and what they do. Viewing and changing the parameters is a
straightforward process. On the VFD keypad press the MODE button until a ‘P’ is displayed. Use the
wheel to scroll to the desired parameter number and press the SET button. The display will change
and display a number value. Use the wheel to adjust the value and press SET. To make no change,
simply press the SET button. When all settings are confirmed/adjusted, press the mode button 3 times
until the display shows 0.00. A more detailed explanation of this process can be found at
http://cci.fyi/vfd ​ .
We have designed a few variants of the
​
Stagehand Pro
​
and they each need slightly different
parameters to run your ​ Smart Chain Hoist ​ efficiently and effectively. To know what ​ Stagehand Pro
and VFD you have, look at the VFD keypad on the face plate and notice where that keypad is located
on the ​ Stagehand ​ itself. If the keypad is square and is located on the bottom right of the faceplate, it is
a ​ Stagehand Pro 3 ​ with an A800. If the keypad is square on the bottom left of the faceplate it is a
Stagehand Pro 2 ​ with an A800. If it is rectangular and is located on the bottom left of the faceplate, it
is a ​ Stagehand Pro 2 ​ with an A700.
YOU MUST SET PARAMETER 77 = 2 PRIOR TO BEGINNING THE MANUAL RESTORE
PROCESS
Pr.
No.
Name Description
Stagehand
Pro 3 Stagehand
Pro 2 A800 Stagehand
Pro 2 A700
1 Maximum frequency
Set the upper limit of the output
frequency.
110 110 110
2 Minimum frequency
Set the lower limit of the output
frequency.
0 0 0
3 Base frequency
Set the frequency at the rated
motor torque. (50Hz/60Hz)
106 106 106
7 Acceleration time
Standard time to accelerate a
movement.
0 0 0
8 Deceleration time
Standard time to decelerate a
movement.
0 0 0
9 Electronic thermal O/L relay
Current rating from the motor
nameplate.
13 13 13
10 DC injection brake operation Set the frequency at which the 0.5 0.5 0.5
Page 16