3
．
Basic operation
3.1 Installation and connections
WARNING
Make sure this machine is grounded, otherwise electric shock or
mechanic default is possibly resulted in
。
Do not use the power source not meeting rating voltage Using
the wrong power source may result in fire or electric shock
。
Do not put out the plug when the
power is on to avoid damage to the
machine
。
Place the machine on a stable
surface, otherwise the machine
may fall therefore get damaged
。
3.1.1 Place the cutter in a plane and roomy place
。
3.1.2 Connect signal cable to COM1 or COM2 port of the computer host
。
3.1.3 Place the bracket behind the host, ensure it is parallel to the host
。
3.1.4 Check voltage of the power source and whether it is grounded, do not
connect to power until all are in a good condition
。
PCUT SERIES USER
‘
S MANUAL
Basic operation
5
