are desirable (firming and replacing the abraded parts)
。
7.18 Question: Why does the plotter is out of our control sometimes?
Answer: maybe while transporting or using it, the signal line is improperly connected,
open the machine properly plug all lines. If the problem still fails to be solved
after the above operation, please contact local agent or maintenance center
。
7.19 Question: Why does the plotter come to halt?
Answer: because it encounters vibrate for a long period, or has been used for a long
period, or is affected by temperature, so dielectric displacement happen to the
servo driving board, therefore resulting in halt, please contact local agent or
customer maintenance center
。
Troubleshooting
PCUT SERIES USER
‘
S MANUAL
30