Page 35
EnderExtender.com – Ender Extender™ 5 Installation Guide
Highlight the printer profile that you will use with your Ender Extender, and click the button labelled Machine Settings.
Note the G28 line in your Start G-Code. If you are using some form of BLTouch or other auto levelling system, we are
going to assume you’ve already learned how to update the firmware, so you would be best suited by updating your
machine’s X, Y and Z size in the configuration.h file and reflashing. However, we will continue here with the custom g-
code. First, we want to set our printer dimensions for X, Y, Z. Depending on the kit you purchased, fill in the values
accordingly.