1、Preheat
Method 1
Method 2
2、Feeding
Or
Tips:How to Replace the Filament?
Method 1
: Cut the filament that close to the extruder, and slowly feed
the new filament until the filament are fed into the tube.
Method 2
: After preheating the nozzle, quickly withdraw the filament
and feed the new filament.
Press the extrusion spring, insert the
filament from the small hole in the
extruder to the nozzle position, and see
that the filament flow out from the nozzle,
that the filament has been loaded.
Dual-color printer ,the second extruder
only need to deliver the filament above the
nozzle module during loading. otherwise
printing will be failure
E、
Loading Filament
5
Содержание CR-3040
Страница 2: ......