After plug the motor to your printer please test the rotation direction of the motor. If you want reverse
the direction you can change the sequence of the splice as shown down below. (blue and red)
1-bule 2-red 3-green 4-black.
CR-10/S Print Head Connection
There is one 8-PIN aviation plug wire for connect the new print head to CR-10/S control box.
8-PIN aviation plug for CR-10S print head
Pin1
Heater cartridge
RED
Pin2
Heater cartridge
YELLOW
Pin3
Thermistor
BROWN
Pin4
Thermistor
GRAY
Pin5
Hotend fan+
BLACK
Pin6
Hotend fan-
WHITE
Pin7
Part cooling fan+
BLUE
Pin8
Part cooling fan-
GREEN
Содержание AL-BMG
Страница 6: ...10 Please prepare the rest parts of extruder and try to install it to the body...
Страница 12: ...21 Insert the nylon filament into the channel till it reach the end of the channel...
Страница 18: ...Do not care the black wires sequence now just splice it one by one Make sure the 1 red 2 blue 3 green 4 black...
