Extruder Motor Connection
1)
You can plug the motor 4P connector to the board directly. If you want inversion the rotation
direction simply reverse the connector of the motor.
2)
I
f the motor wire is not long enough or you don’t want to open the machine to plug the connector
you have to change the connector of the new extruder motor. The connector is including in the
mounting plate kit.
Содержание AL-BMG
Страница 6: ...10 Please prepare the rest parts of extruder and try to install it to the body...
Страница 12: ...21 Insert the nylon filament into the channel till it reach the end of the channel...
Страница 18: ...Do not care the black wires sequence now just splice it one by one Make sure the 1 red 2 blue 3 green 4 black...
