DE Web: https://www.creabest.de/
FR Web: https://www.creabest.fr/
IT Web: https://creabest.it/
7
Insert the black wire to blue clamp,red wire to red clamp,and fasten screws tightly, see
below:
Please fix the battery pack with glue or belt firmly,the distance between battery pack and
inverter should be less than 75cm.
Make sure inverter is power off and to lock the BLACK wire to inverter’s NEGATIVE pole
tightly, and then lock the other terminal to battery’s NEGATIVE pole tightly too. Please use
insulating tape to protect exposed wire copper.
Make sure inverter is power off , and to lock the RED wire to inverter’s POSITIVE pole
tightly,and then lock the other terminal to battery’s POSITIVE pole tightly too. Please use
insulating tape to protect exposed wire copper.
Do not short circuit when locking the wire to the battery poles. The clamps and term- inals
must be connected firmly.
3.6 Installation location/condition
Although the weight of LiFePo4 batteries is lighter than that of lead-acid batteries (AGM, GEL,
etc.), you must ensure that the batteries are properly fixed when installing and always use
appropriate transportation equipment. If battery holders are already available and suitable, you
can continue to use them.
Note: The battery can be placed vertically or lying down.