
BIO
REMEDIATING parts washing system
SmartWasher
®
USER INSTRUCTION MANUAL
ORIGINAL INSTRUCTIONS
page 20 of 80
7.1.4. Model SW-37
1.
Remove the OzzyMat
®
from its package, unfold
it and lay it on the mat support grid located in
the lowest level in the sink. Make sure to lay the
OzzyMat
®
white side up.
2.
Place the false bottom in position in the sink.
3.
Form the flexible nozzle to its desired
shape and be sure that the parts brush is inside
the sink
4. DO NOT PLUG UNIT IN BEFORE
ADDING OZZY JUICE
®
5.
At start up, carefully add ± 95 liter of
OzzyJuice
®
to the SmartWasher
®
by slowly pouring
the solution directly into the sink.
6.
Plug the unit into a 220 VAC GFCI elec-
trical outlet
7.
The SmartWasher
®
will take approximately four
hours to heat up to its selected optimal temperature
of 40°C (± 1°) or 46°C (± 1°). This temperature
will be maintained as long as the SmartWasher
®
is
plugged in and full of OzzyJuice
®
. If the “Add Fluid”
light is on, the heater automatically shuts off.
32981 Plastic basket
33047
False bottom
32950
Multi-Layer
OzzyMat FL-4
33076
Mat support grid
33075
Drain basket