© 2021 Craycle Hobby. Copies allowed for personal use only. Not for commercial use.
Assembly
www.craycle.com
STEP 7
1-Insert the carbon pipe all the way into the fuselage and stick it.
2-Insert the wire holder (from the asm_parts) to the pipe.
3-Install the tail wing all the way to the carbon pipe and stick it.
4-Insert the wing mounting bracket (Red part) inside the fuse
-
lage where the wing is going to be assembled and then stick it
into the fuselage with CA glue. In this step be careful for the
alignment of the mounting holes.
5-You can stick the m4 nut to the wing mounting bracket with
CA glue carefully before previus step.
6-Now you can assembly the wing to the fuselage with one
M4x25 imbus screw.
7
