© 2021 Craycle Hobby. Copies allowed for personal use only. Not for commercial use.
Assembly
www.craycle.com
STEP 8
Remove the wing to work easy on the next steps.
Now you can install all your electronics; install your Motor, ESC,
Lipo Battery, Servos and Ø1 mm Push Rods (Music Wire).
You will need to drill the fuselage from the marked points with
push rod wire from the back of the fuselage for the push rods.
Check your servo direcions on the transmitter. Setup your
EXPO and Level settings.
Flaps should move 6 mm down and 9 mm up on the elevator
and 9 mm equal right and left on the rudder for the first flight.
The 40% EXPO setting is good for easy control on all directions.
9