© 2021 Craycle Hobby. Copies allowed for personal use only. Not for commercial use.
Print Guide
www.craycle.com
You will need a printer which has a bed size at least 180x180x180.
We have optimazed the Ranger Mini for normal PLA but if you
can use the LW-PLA it’s going to be better.
There is settings table on the last page for all of the parts and
we have prepared the necessary .curaprofile files for you. You
will need to use both of them.
First of all you need to have the CURA slicer program. When
you open the program, you can find your own printer from the
list but you should define your own printer with the custom
option. Custom option is always works properly.
Open the Add Printer window, select Custom FFF printer, set
your printer name and click to the add button for the next step
1
