© 2021 Craycle Hobby. Copies allowed for personal use only. Not for commercial use.
Assembly
www.craycle.com
STEP 11
Now you can install all your electronics. Make transmitter
settings (Use 40% Expo and set 11mm up 9mm down control
movement for ailerons and elevators for the maiden. Set 11mm
right and left for rudder ).
Glue the “lock_body” part into the “hatch1”. Assemble the
“lock_catch” part by using m3x8mm bolt (Comes with
brushless motors). Insert and stick the “cub_pim” parts
corresponding to the hatches into the fuselage (Red pims in
front of the wingspar.) Assemble the “hatch2” to the fuselage
by using 2 mm screws.
11
