© 2021 Craycle Hobby. Copies allowed for personal use only. Not for commercial use.
Assembly
www.craycle.com
STEP 10
Prepare quick release landing
gear by using 2mm steel wire. You
can use this page by printing as
%100 scale and also you can use
the dimensions as mm.
Assemble the “wheel35_ring” and
“wheel35_rim” parts together and
install them onto the landing gear
that you prepared (You can make
a clear hole in the “wheel35_rim”
by drilling it with 2 mm drill bit.)
Glue the “spinner_adaptor” and
“spinner_base” parts together by
inserting 5 mm rod to make it
centered. Assemble the spinner,
motor and landing gear as shown.
10
