Crary WeedRoller PRO Скачать руководство пользователя | Manualshive

Страница: 2 / 56

background image

© 2014, Crary Industries, All rights reserved. Produced and printed in the USA.

Dear WeedRoller PRO Customer,

Thank you for purchasing a Crary WeedRoller PRO. The WeedRoller PRO is designed, tested, and manufactured to give years of
dependable performance. It is necessary to correctly adjust and make regular inspections to keep your WeedRoller PRO operating
at peak efficiency. The following pages will assist in the installation, operation and maintenance of your machine. Please read this
manual before operating the WeedRoller PRO.

If you have any questions or comments about this manual, please call us toll-free at 1-800-247-7335.

Please call or write your local factor-authorized WeedRoller PRO dealer with questions or problems with your WeedRoller PRO.

This document is based on information available at the time of its publication. WeedRoller PRO is continually making improvements
and developing new equipment. In doing so, we reserve the right to make changes or add improvements to our product without
obligation for equipment previously sold.

Please Send Us Your Warranty Registration Card

A warranty card is included with the WeedRoller PRO. Please take the time to fill in the information requested on the card. When you
send your completed card to us, we will register your WeedRoller PRO and start your coverage under our limited warranty.

BEFORE YOU BEGIN

HOW TO REACH US

ADDRESS

HOURS

TELEPHONE

FAX NUMBER

E-MAIL

INTERNET

WeedRoller PRO

237 12

th

St. NW

West Fargo, ND 58078

Monday-Friday

8 am-5pm (CST)

Parts and Service

Ph: 701.282.5520 •

800.247.7335

Fax: 701.282.9522

Email: [email protected] •

[email protected]

Online: www.weedroller.com

Serial Number Location

Always give your authorized WeedRoller PRO dealer the serial
number of your WeedRoller PRO when ordering parts, requesting
service or any other information.

Please record the serial number in the space provided on the front
cover and on the warranty and registration card.

Serial Number Decal

MANUFACTURED BY CRARY INDUSTRIES

MANUFACTURED IN U.S.A.

XXXXXX

WEST FARGO, NORTH DAKOTA 58078 U.S.A.

SERIAL NUMBER

SN Location

«
1
2
3
4
...
»

Содержание WeedRoller PRO

























































Отзывы:

Нет отзывов

Похожие инструкции для WeedRoller PRO

Бренд: GE Страницы: 43

Бренд: GE Страницы: 37

Бренд: GE Страницы: 210

Бренд: GE Страницы: 160

Бренд: GE Страницы: 146

Бренд: GE Страницы: 6

Бренд: GE Страницы: 27

Бренд: GE Страницы: 4

Бренд: NEILPRYDE Страницы: 55

Бренд: HANYOUNGNUX Страницы: 4

Бренд: Park House Healthcare Страницы: 6

Бренд: J&M Страницы: 33

Бренд: Nabtesco Страницы: 26

Бренд: Omlet Страницы: 60

Бренд: M-Audio Страницы: 48

Бренд: M-Audio Страницы: 19

Бренд: M-Audio Страницы: 17

Бренд: M-Audio Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды