10
Connecting the Tubing Connector Set
Connect one end of the Main Tubing to the single opening of the Y- Connector.
Connect one tubing connector to the other end of the main tubing as shown.
There are 2 split tubes with tubing connectors attached on each end. Connect
the open end (without the tubing connectors) to the Y-Connector openings as
shown. Insert the other sides of the tubing with the tubing connectors into the
air vents on each diaphragm caps as shown.
NOTE:
1.
Make sure the tubing set
is assembled correctly
2.
When one side of the split
tubes is removed and
the plug is inserted into the
opening on the Y-Connector,
it becomes a single pump.
Connecting the Pump Unit
Insert the main tube with the single tubing connector into the right side of the
pump unit. Ensure that the pump unit and the expression collection kit are
connected tightly, otherwise suction may be affected.
To connect the power supply, Plug the AC Adaptor into the wall outlet.
Attach the power cord to the left side of the pump unit.
Содержание EE-9002
