Crane EE-9002, Руководство пользователя

Страница: 22 / 28

22
Replacing parts
Your Crane breast pump has been made to our highest standards. However, over
time and multiple uses you may find some of the silicone parts will begin to lose
their elasticity. This may result in reduced suction levels or other problems.
Authorized replacement parts are available through your Crane supplier and
many can be purchased separately so that you can replace any used or degraded
parts.
Disposal
When your Crane breast pump reaches the end of its life it should not be
disposed of with other household waste. It should be recycled through a
designated electronic recycling location. Please contact your local recycling
center for details of where you can dispose of electronic waste. Please recycle
the cardboard packaging and manual. Breast shields and other clear plastic parts
can be recycled. Check with your local recycling center. Clean and sanitize parts
before placing in the recycling.
Find Your Fit
Your Crane Breast Pump comes with the most popular sized option of Silicone 3D
Cushion. This part of the milk collection kit fits around the areola and nipple,
using the right size is important. Pumping with the wrong size can be painful and
result in less milk being expressed. Other size options of Silicone 3D Cushion to
fit your Crane breast pump are available to suit different sizes of nipple. Use the
guides below to help find the best option for you.
Signs your Silicone 3D Cushion may be too large
• Excess areola is drawn into the Silicone 3D Cushion or is being pulled over the
nipple. A small amount is typical but it should not be painful.
• Sensation of tugging and/or pulling pain
• Nipple is pulled to the end of the Silicone 3D Cushion
• Silicone 3D Cushion falls from breast when pumping
Signs the Silicone 3D Cushion may be too small
• Painful rubbing of nipple in cushion
• Nipple is not moving freely within the cushion
• A small amount of milk is being expressed