background image

 

 

8

 

 

MAINTENANCE 
 
CAUTION:  
Always be sure that the appliance is unplugged and switched OFF 
before cleaning or attempting to store the item. NEVER PLUG OR 
UNPLUG UNIT WITH WET HANDS. 
 
DO NOT leave water in water tank or water basin when unit is not 
in use as it may result in the build up of mineral deposits and 
bacteria that can inhibit the output efficiency of the humidifier.  
 
PLEASE NOTE that if water remains in the water tank for more 
than a day or two, bacterial growth is possible.   
 
ALWAYS use fresh cool water when using unit. 
 
NOTE: 

 When removing water tank, water may accumulate under vapor lid and on the 

bottom of the water tank.  It is recommended to have a dry cloth ready to dry wet 
surfaces. 
 

DISINFECTING THE WATER TANK AND WATER BASIN 
 

1.

 

Fill water tank with 1 teaspoon of household bleach or white vinegar in 1 gallon 
of water.  Let stand twenty minutes, shaking vigorously with two hands every 
few minutes, drain and rinse with clean water until the bleach or vinegar smell is 
gone.  Dry with a clean cloth or paper towel. 

2.

 

Wipe the water basin with a soft cloth dampened in the bleach or white vinegar 
and water solution.  Rinse the water basin with cool water to remove any smell.  
DO NOT IMMERSE WATER BASIN IN WATER. 

3.

 

Wipe all exteriors surfaces of the base with a soft, dry cloth.  Do not immerse the 
base in water or use water to clean the base.  An electric shock may result or the 
humidifier may be damaged. 

 

GENERAL MAINTENANCE AND CLEANING  

Before any cleaning operation, switch the humidifier off and unplug it.  

 

1.

 

Always unplug the unit before cleaning. 

2.

 

The humidifier must be drained and cleaned before storing. 

3.

 

Once unplugged the exterior of the unit may be cleaned by wiping with a dry cloth.

 

Caution:

 The ON/OFF switch must be thoroughly dry before unit is again plugged 

into power source. 

4.

 

There  may  be  some  lime  deposits  in  the  nebulizer,  particular  in  areas  with  hard 
water. Overcome this drawback by cleaning the nebulizer with water and vinegar on 
a soft cloth regularly, as follows:  

A.

 

Dampen  a  cloth  with  a  few  drops  of  white  vinegar  or  bleach  water  solution 
and wipe the nebulizer gently, until the lime deposits disappear completely.  

B.

 

Rub down gently with a dry cloth and remove remains of humidity.  

C.

 

Do not rub the nebulizer with solid objects.  

D.

 

Do not clean with chemical products. 

 

Содержание EE-864















Отзывы: