Crane CPI ALIO, Инструкция по установке и эксплуатации

Страница: 4 / 11

4 | P a g e
INSTALLATION:
Step Process
1
Turn off power to
the vend- ing
machine
2 Remove the
existing bill
validator Unscrew the four hex nuts from the mounting posts with the 11/32 nut
driver, and disconnect any cabling.
3 Remove the
existing
telemeter Disconnect all connections to the telemeter and remove the antenna from
the top of the vendor.
Because ALIO Note’s antenna is contained within the bezel, there is no need
to run an antenna through the top of the machine.
When removing an existing antenna, follow your company’s procedure for
sealing the antenna hole.
4 Remove the Bill
Validator
control board
cover. Unscrew the control board cover, and pull to remove. If the ex- isting bezel is
connected to the control board via a ribbon cable, disconnect the ribbon
cable before proceeding.