Crane Cafe VII, Руководство по установке

Страница: 55 / 84

6840070 Page 49
August, 2005
Café VII
®
Setup
PUMP TEST
The display shows:
mrjm
. To test liquid pump operation, proceed as follows:
1. Press , then . The display shows:
mrjm===u
, and counts down
the time (X) remaining on the pump test.
NOTE
If the brewer is clamped at the start of this test, the pump will
run much longer in order to evacuate any remaining liquid.
BREWER TEST (MACHINES WITH BREWERS ONLY)
The display shows:
_obtbo
. To test brewer operation, proceed as follows:
1. Press , then . The display shows:
jlsb===JO
. This indicates
that the brewer is moving to its closed position. When it reaches that
position, the display shows:
`i^jm===N=J
(1 is the switch that is closed when
the brewer is clamped).
2. Press , then . The display shows:
jlsb===N=J
. This indicates
that the brewer is moving to its opened position. When it reaches that
position, the display shows:
lmbk===J=O
(2 is the switch that is closed when the
brewer is open).
WHIPPER TEST
The display shows:
tefm==NOP
. To test an individual whipper, press the number
corresponding to the whipper you want to test. The display shows
tlohfkd
while the whipper is running, then returns to
tefm==NOP
. Pressing ,
then tests only the first whipper.