Crane Merchandising Systems Merchant 180 Скачать руководство пользователя

Страница: 67 / 170

Merchant™ Operators’ Guide

Program-

1810006

January 2008

DIAGNOSTIC ERROR MESSAGES

ERROR MESSAGE

ERROR DESCRIPTION

No Errors

Indicates there are no errors in the merchandiser.

All Coin Mech Tubes Have Errors

All coin mech tubes have errors.

All Selections Disabled

No selections will vend. Includes regular selection disable, and
Time-of-Day disable.

Anti-jackpot SureVend™ On

Indicates that SureVend™ is ON and the anti-jackpot timer is
counting down (running). This message will be removed from
diagnostic list when the timer expires.

NOTE: Applies to both MUST and OPTIONAL SureVend™.

Auto Door Error

Automatic door failure. Check for a door jam, a faulty switch or
motor.

Bill Validator comm

Bill Validator communication error.

Bill Validator has jammed bill

A bill is jammed in the acceptance path of the Bill Validator.

Bill Validator Motor

Bill Validator motor failure.

Bill Validator ROM

Bill Validator ROM failure.

Bill Validator sensor

One of the sensors in the Bill Validator has failed.

Bill Validator Stacker is full

The Bill Validator stacker is full of bills.

Bill Validator Stacker is open

The Bill Validator stacker is open or removed.

Card Jammed in Card Reader

Card reader has failed because a card is jammed in the unit.

Card Reader Comm.

Card reader to VMC communication error.

Card Reader Error
Manufacturer Code: XX

Card reader is reporting a manufacturer defined code of XX.

Contact card reader manufacturer. The card reader is operational.

Card Reader Failure
Manufacturer Code: XX

Card reader is reporting a manufacturer defined code of XX.

Contact card reader manufacturer. The card reader is out of service.

Card Reader Reports a Comm.
Error

Card reader is reporting communication problems but is operational.

Card Reader Reports a Comm.
Error & is OOS

Card reader is reporting communication problems and is out of
service.

Card Reader Reports it has failed

Card reader is indicating it has failed.

Содержание Merchant 180











































































































































































Результаты поиска

Содержание Merchant 180

Отзывы:

Похожие инструкции для Merchant 180

Бренды по названию

Популярные бренды

Crane Merchandising Systems Merchant 180, Руководство оператора

Результаты поиска

Содержание Merchant 180

Отзывы:

Похожие инструкции для Merchant 180

Бренды по названию

Популярные бренды