17
Crane
Electronics Ltd
The force in torque management
Crane Electronics Ltd
Watling Drive
Sketchley Meadows
Hinckley LE10 3EY
Tel: +44(0) 1455 25 14 88
www.crane-electronics.com
e.g. Peak Mode
e.g. Threshold
Pushing the up or down arrow key will take you to another screen where you can change the Direction,
Frequency, Cycle End Time, 2
nd
Parameters and Measurement Units. Use the up and down arrows to navigate
and the left and right arrows to change.
Direction:
Auto
Clockwise
Anti-clockwise
Frequency Response (Hz): 75, 151, 256, 307, 384, 542, 768, 921, 1024, 1536, 2304, 3072, 4608
Cycle End Time (s):
0.20, 0.5, 1.0, 2.0, 5.0, 10, 20
2
nd
Param:
0 = Off, 1 = On
Units:
Nm, lbft, lbin, Ncm, kgcm, kgm, kNm, klbft + others (display valid units for span)
Fourth press of the settings icon will take you to the
Auto Print settings (5
th
Settings screen).
The Auto-Print settings are as follows:
Format:
Show the Auto-Print format. Display as [xxxx] 1 = Show, 0 = Not Shown
Date:
Show the date of the reading.
Time:
Show the time of the reading.
Status:
HI, LO, OK
Direction:
Right (Clockwise), Left (Anti-clockwise)
Duration:
Reading duration in seconds.
Spec Limits:
USL, Target and LSL.
Secondary:
Show if there are any second parameters.
Serial No.:
Show the serial number of the tool.
PRINTER SETTINGS
