manualshive.com logo in svg

Crane Electronics DTT Opta, Руководство оператора

Поделиться
Скачать
Crane Electronics DTT Opta Скачать руководство пользователя страница 30

OPERATOR’S MANUAL

30

SECTION 1

Use the 

 and

 

 keys to move the arrow across all of

the digits in turn, and the 

  

and

 

 

arrow to cycle

through the alpha numeric characters to input the correct

digits until the code displayed is the same as the one on the

certificate.

Options available:

Activate the Unlock Code.

The software is now unlocked.  Features marked with a tick

are available to the user.

List Feature

s

Return to Previous Screen

NOTE :

Any items not ticked in the list may be encountered during

operating the Opta as greyed out items. When attempts are

made to access these icons, an alert message will appear

advising the user that this item is currently unavailable. It is

possible for the user to upgrade to include these options by

contacting Crane Electronics Ltd. An update activation code

can be supplied to enable the user to access these features

without the need to return the Opta to the factory.

 GRAPHS

TorqueStar Opta allows the selection of the maximum

duration of the Trace function.

Select the time required to suit your application.

Icons used in the Unlock screen

Return to previous screen.

Activate unlock code

List features

Содержание DTT Opta








































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды