OPERATOR’S MANUAL
16
SECTION 1
PLOT TRACE (LAST READING ONLY)
When zoom is selected, a dotted rectangle (marquee)
appears in the display. Use the arrow keys to postion the
panel over the portion of the plot to be magnified and Zoom
In or Zoom out.
To change the Direction of rotation
, highlight the required
Direction (Right, Left or Auto) and ENTER.
To change the Cycle End Time
, highlight the required
figure from the list and ENTER.
To change the Frequency Response
, highlight the
required figure from the list and ENTER.
To change the Torque Threshold
, key in the required
figure (between the max. and min. displayed on screen)
and ENTER.
To change the 2nd Parameter
, choose between
Angle
and
None
and ENTER.
To change the Angle Threshold
, key in the required figure
(between the max. and min. displayed on screen) and
ENTER .
CHANGING THE SETTINGS (QUICK READ)
To change the settings for the chosen Quick Read mode,
select the Settings icon
The screen will now display the Settings Menu and the user
can change some or all the following:-
Transducer settings for non UTA only
Units of Measurement
Direction
Cycle End Time
Frequency Response
Torque Threshold
Second Parameter
Second Parameter Threshold (if applicable).
To view addiitional parameters select previous or next
page keys.
The options available will vary according to the chosen
measure mode.
To change the Units of Measurement,
highlight the
required Units from the list and ENTER.
Icons used In Quick Setup
Return to previous screen.
Previous page
Next page
