2. Select the ‘Inputs’ option using the Source Switch [6].
3. Connect headphones to N22H’s headphone output [2].
i.
If using battery power, the unit will power on automatically when headphones are
connected.
ii.
If using mains power, N22H powers on automatically when power is detected.
Once connected, stereo line sources passed into N22H’s inputs will be sent directly through to the
headphone amplifier for monitoring. Adjust headphone level [1] to taste.
Using N22H instead of the headphone outputs of your interface allows you to upgrade the
headphone monitoring quality of your existing setup and benefit from more power and higher
clean volume with a wider range of headphones.
Note:
Connecting N22H to the headphone port of another device such as a computer will
work however the technical performance of N22H cannot be guaranteed and the
amount of level available will vary depending on the device being used.
