Inputs [4]
The Inputs [4] on N22H are used to connect audio from
an external device into the C.A.S.T. system or directly into
N22H’s headphone amplifier during standalone operation
(when the Source Switch [6] is set to ‘Inputs’).
Devices connected to N22H’s Inputs are always patched
to the TT Output paths of the C.A.S.T. connectors for
connectivity with other C.A.S.T.-enabled devices. The
Inputs on N22H send into the C.A.S.T. system passively
and do not require N22H to be powered on to operate.
N22H’s Inputs accept balanced mic/line signals as well as
unbalanced line signals from external devices. It can also safely pass 48v Phantom Power
depending on the devices used in the system.
“Using C.A.S.T. with 48v Phantom Power”
In the above diagram, the C.A.S.T. Output [14] of N22H is connected to the C.A.S.T. Input of an N22
using a shielded Cat 5e, Cat 6, or Cat 7 cable. Audio connected to the Inputs [4] of N22H (or any
other C.A.S.T. device) will arrive at the connected N22’s Outputs recording or patching elsewhere.
N22H’s Inputs can accept balanced mic/line signals as well as unbalanced line signals.
