Sweeper H
Original Operation Manual English
-8
4
Delivery, transport, storage
4.1
Delivery
Risk of high dead weight
•
The machine must not be lifted manually.
•
Pull the machine off the transporter by its handles.
Transport inspection
•
Check the machine for completeness and potential
damage upon delivery.
•
Assembly and start-up have to be performed by a
specialist dealer and/or an expert in this field.
4.2
Transport
Transport without packaging
•
Shut down the machine.
•
Fix the machine by using lashing straps.
4.3
Storage (short-term)
•
Do not store the machine in the open air
•
Do not expose it to aggressive materials
•
Clean machine with a soft brush before start up.
4.4
Storage (long-term)
The following recommendations will help to ensure the long-
standing functionality of your Cramer machines:
1. Ensure that fuels are prepared for long-term storage
(longer than 30 days), e.g. add fuel stabilizer.
2. Clean the machine - Important! Also clean the underbody
and sweeping brushes.
3. Renew motor oil
4. Treat spark plugs
5. Check machine for wear, repair paint damage
6. Store the machine when it is dry.
Please refer to the attached motor operation manual for
instructions on how to care for the motor!
5
Start up (first machine inspection)
5.1
Safety
Unauthorized restart
•
It is prohibited to start the machine while another person
is working on it.
•
When the sweepings container is emptied, the machine
must be switched off.
Risks of insufficient order and cleanliness
•
Clean the machine from dried dirt and sand regularly.
•
Check the machine for blocking objects.
Risks of non-applied protection devices
WARNING !
Risk of injuries by rotating brushes and V-
belts!
Parts of the body may be seized if you reach into the
brushes or V-belts.
Lack of covers may cause injuries by flinging materials.
Do not reach into the brushes during operation.
Do not open or remove any covers during operation.
5.2
Requirements at location of use
•
Only leave the machine on plane surfaces and solid
ground.
•
Only mount accessories on plane surfaces and solid
ground.
5.3
Assembly
Please observe the Assembly Instructions in the Annex of
this Operation Manual.
5.4
Start-up
Start the machine.
1.
Fill the fuel tank
2.
Check motor and oil level (see Motor Operation Manual)
3.
Put on protection equipment
4.
Push throttle to CHOKE
5.
Slightly pull starter lever to resistance
6.
Strongly pull starter lever
7.
Carefully return starter lever
8.
Motor is running
9.
After a short time, move throttle to FULL THROTTLE
10. The machine is ready for use.
