FLIP TARP
CRAMARO TS S.r.l. – 37044 COLOGNA V.TA (VR) - VIA QUARI DESTRA, 71/G TEL. +39 0442/411688 / FAX + 39 0442/411690
E-MAIL [email protected] WEBSITE: http://www.cramaro.com - Manual no. MFT002-EN-ED07 – date 02/05/2017
Page 19
PRESENTATION OF THE TARPAULIN
FOR CONTAINERS MORE THAN 7 M IN LENGTH
This configuration involves some components that differ from those in the previous configuration. The side arms
consist of 80x50 tubular elements inside which move springs of various sizes.
The adjusting system for the latter is based on the same operating principle: they are tensioned using the
designated spanner and adjusting rod (refer to the diagram). Remove the protective cover to access the
adjusting rod.
PROTECTIVE
COVER
TENSIONING NUT
ADJUSTING ROD
This operation must be done with the arms fixed to the rotation fulcrum plate and connected to the tarpaulin with
the designated transversal pipe.
During the operation, make sure that the tension of the springs is practically the same to the left and to the right,
ensuring that the side arms can turn in a uniform manner and that the tarpaulin can be rolled up correctly.
TRANSVERSAL PIPE
JOINING THE ARMS
After making the adjustment, put the protective cover correctly in place again.
