CRAM-A-LOT VB-42-B Скачать руководство пользователя страница 3

Страница: 3 / 32

Congratulations

You have just purchased a quality designed and manufactured CRAM-A-LOT® Baler.

Manufacturing balers and compactors since 1978, J.V. Manufacturing offers quality workmanship, factory trained installa-

tion and a national service network. Advanced features have been designed into the Baler for modern waste disposal

operations.

As with any investment, a return is expected, and the return received from this investment will be in the form of maximum

performance during many years of dependable service.

In order to maintain quality performance and safe operation of your new baler, it is necessary to observe and practice the

operation and maintenance information provided in this manual.

The employer involved in the operation, maintenance, and installation of the baler should read and understand the most

current version of the following applicable standards.

ANSI Standard No. Z245.5, “Baler-Safety Requirements for Installation, Maintenance and Operation”.

A copy of this standard may be obtained from:

ENVIRONMENTAL INDUSTRIES ASSOCIATION

4301 Connecticut Avenue, NW

Washington D.C. 20008

Website http://www.wastec.org

If, after thoroughly reading this manual, there are questions about the operation or repair of your baler, please contact

J.V. Manufacturing, Inc., and our Customer Support Team will provide assistance.

CRAM-A-LOT® Customer Support

Tel: 800-754-4290

Fax: 479-751-7870
Hours: 7:00 am - 5:00 pm CST

Monday - Friday

[email protected]

JV Manufacturing Corporate Philosophy

It is the stated goals of J.V. Manufacturing, Inc. to build equipment of uncompromising quality, provide the absolute best

customer service in our industry, and to conduct all business with honesty and integrity, whether it be with customers,

vendors, fellow employees or members of the community.

J.V. Manufacturing, Inc. encourages positive change. Change will provide opportunities for future growth and new direc-

tions as we move into the future.

Содержание VB-42-B

































Результаты поиска

Содержание VB-42-B

Отзывы:

Похожие инструкции для VB-42-B

Бренды по названию

Популярные бренды

CRAM-A-LOT VB-42-B, Руководство владельца и оператора

Результаты поиска

Содержание VB-42-B

Отзывы:

Похожие инструкции для VB-42-B

Бренды по названию

Популярные бренды