Portable Sensor:
1.Bell Clip
2.Battery Compartment
3. C/ºF (Celsius/Fahrenheit) selection button
4.TX (Transmit) button
5.Channel selection button
o
BATTERY INSTALLATION AND CHANNEL SET UP
Main unit:
1.Press the tabs on the battery door and lift it off.
2.Install two (2) x AAA size batteries (NOT included) into the battery compartment as shown on the figure below
and the polarity markings inside battery compartment.
3.Replace the battery door.
4.Press the CHANNEL button repeatedly on the rear of cabinet to 1; 2 or 3 as desired. The selected channel
number will appear on the display Left-Bottom corner.
TIME ALARM UP DOWN CHANNEL SNZ
1
2
3
4
5
C/ F TX
AAA 1.5V
AAA 1.5V
AAA
1.5V
AAA
1.5V
AAA
1.5V
AAA
1.5V
TIME ALARM UP DOWN CHANNEL SNZ
TIME ALARM UP DOWN CHANNEL SNZ
3
