3.The digits of Minute will blink. Press the UP or DOWN button to set the Minute. When finished, press the Alarm
button to resume normal display.
4.Press the ALARM button to activate alarm, the alarm on icon
will appear on the screen. To cancel, press
the ALARM button again, the alarm on icon
will disappear.
Press ALARM button to shut off, alarm will automatically reset for the following day.
To deactivate alarm time setting (Alarm will not goes off at next day), press the ALARM button twice. The
alarm on icon
will disappear.
When alarm goes off, press the SNZ (snooze) button to turn it off temporarily. The alarm will turn back on
automatically five (5) minutes later. This feature can be repeated until ALARM button is pressed.
5.When alarm goes off:
TROUBLE SHOOTING GUIDE
Check the following before requesting service:
Symptom
Not workable; Dim segments
The Temperature and Humidity
from Portable Sensor can't show
on the Main Unit
The unit of Temperature incorrect
The Hour format incorrect
Press the DOWN button repeatedly to
set the unit of temperature to Celsius
(ºC) or Fahrenheit (ºF) as desire
Possible Cause
Solution
Batteries consumed
Replace by new batteries
The location of Portable Sensor too far
Put the Main Unit and Portable
Sensor closely
Set them in same channel
The Transmit and Receive channels
between Main Unit and Portable
Sensor are difference
Wrong settings
Wrong settings
Press the UP button repeatedly
to set the display format to 12 or
24 hour as desire
7
.
.
.
